华为交换机重置密码

admin

Jan 23 2017, 19:21:20
mknod: /dev/mvPP: File exists
BootLoad version : 020a.0001
Backup U-Boot ............................................................. done

Press Ctrl+B or Ctrl+E to enter BootLoad menu:  2

Password:


The default password is used now. Change the password.

        BootLoad Menu

     1. Boot with default mode
     2. Enter serial submenu
     3. Enter startup submenu
     4. Enter ethernet submenu
     5. Enter filesystem submenu
     6. Enter password submenu
     7. Clear password for console user
     8. Reboot
    (Press Ctrl+E to enter diag menu)

Enter your choice(1-8): 7

Note: Clear password for console user? Yes or No(Y/N): y   
Clear password for console user successfully.
Note: Choose "1. Boot with default mode" to boot, then set a new password

        BootLoad Menu

    1. Boot with default mode
     2. Enter serial submenu
     3. Enter startup submenu
     4. Enter ethernet submenu
     5. Enter filesystem submenu
     6. Enter password submenu
     7. Clear password for console user
     8. Reboot
    (Press Ctrl+E to enter diag menu)

Enter your choice(1-8): 1
Now, the current startup file is flash:/s5720li-v200r010c00spc600.cc

Info: Check signature, please wait........